Engineering in Kenya

Mechanical Seminar Topics: Hovercraft and Aeroplane Propulsion Systems

Posted by on Feb 9, 2018 in Mechanical Engineering | 0 comments


There are numerous Mechanical Seminar Topics that can be used in training engineers. First, there is Hovercraft. This is a kind of vehicle that has the ability to fly in air like an aircraft would do. It can float on water like a boat would and can also drive on terrain like a car. It has the ability to move along all surfaces such as ice, grass, sand and water. The latest aircrafts have been designed in such a manner that they can operate along the water surface, while at the same time being able to both load and offload their cargo on land. Engineering in Kenya has more articles.

Therefore, a topic on the Hovercraft will be able to cover the general overview of the device, its history and the principle of operation. Aeroplane propulsion systems also form part of Mechanical Seminar Topics. These are the systems that constitute mechanisms that induce flight of an aeroplane. When a plane is travelling through air, it is aided by a number of forces. These are the weight force, lift force, thrust force and drag force. Lift force emanates from the airplane’s motion and is meant to overcome weight. The weight force always acts towards the earth’s center. Drag force is a resistance force to the motion of the plane. Thrust force helps the aircraft to be lifted off in air.

 

Running Gearing and Fuel Energizer as Relevant Mechanical Seminar Topics

 

Running gearing is the latest mechanism that is used to create rotary motion from progressing motion. The mechanism’s technology makes it possible to carry various operations on the engine such as removing the key component from the engine and making the parameters of the engine better. All engines that were initially made and installed with crank mechanisms can have the running gear technology applied on them. The traditional crank engine and the latest running gearing engine can be compared through four main ways. These are product cost, kinematics, dimension and mass, and gas dynamics. Looking at all these aspects is very important when going through Mechanical Seminar Topics.

Mechanical Seminar Topics Mechanical Seminar Topics: Hovercraft and Aeroplane Propulsion Systems

Mechanical Seminar Topics

Running Gearing and Fuel Energizer as Relevant Mechanical Seminar Topics continued

 

Lately, there is a lot of wasted fuel and decreased efficiency in automobiles. This is brought about by the carbon residue that results from most hydrocarbon fuels. As a result, some parts of the automobiles end up being clogged. Such parts include the carburetor and the fuel injector, among others. Majority of the fuels used in engines are in liquid form. They only undergo combustion in the presence of air and if they undergo vaporization. Fuels responsible for internal combustion in most engines have magnetic movements. However, realignment in these molecules is not there and there is no interlocking of the fuel molecules with oxygen before any combustion.

There is therefore need for the realignment and ionization of the fuel molecules. The fuel energizer is responsible for the creation of the magnetic field required for this realignment. The Fuel Energizer qualifies to be among the Mechanical Seminar Topics because of the roles it plays. First, it ensures that the engine runs smoothly due to the long term maintenance created by its use. Second, it leads to the reduction of both engine noise and the smoke. Third, through its use, there is increased mileage per liter and pick – up. Its installation is done on trucks and cars either just before the carburetor or before the injector.

Agile Manufacturing as Key among Mechanical Seminar Topics

There is change in both the entire world and the consumer standards. To measure up to these new demands from consumers, the industries and other organizations have to adjust to the situation and produce products and services that are customized so as to meet the consumer standards. Agile engineering is a new US concept aimed at exploring the methods used to address these new demands. It is aimed at making the organization meet the dynamic changes in the market place so as to outdo competitors. Agile manufacturing is very critical among Mechanical Seminar Topics and mechanical engineers should learn it so as to meet the consumer standards within the market. In conclusion, the Mechanical Seminar Topics include: agile manufacturing, fuel energizer, running gearing, aeroplane propulsion systems and Hovercraft, among others. And thus Mechanical Seminar Topics